Showing posts with label heat gun. Show all posts
Showing posts with label heat gun. Show all posts

Tuesday, 17 December 2013

November at the Fibre Optics Group

The November meeting of the Fibre Optics Group began with another warm up collage. As we have mentioned before, we are focussing on a design principle or element at the beginning of each meeting. We then start the clock and have only a half hour to produce a collage illustrating the principle/element chosen for the month.We have a tub full of various supplies, and these are the only things we are allowed to use to make our collage. 
Half Hour Collages

In November, Judi presented the design principle/element of LINE.  Line is defined as “a mark, long in it’s proportion to its breadth, made on a surface with a pen, pencil, tool, etc.” Line is often referred to the “the most basic element of design”, yet it functions in complex ways and can express a variety of verbal and visual concepts.

Here is a photo of our collages. It is easy to see that we all have different styles in our approach and resulting collages.


UTEE embellishments and
shrink plastic embellishments

After this, we were ready to start our play time. We were working with Melt Art™ Ultra Thick Embossing Enamel™.  We dipped or sprinkled, then heated with a heat gun. We melted it in a Ranger’s Melting Pot®, and then poured, dipped and let it dry. We stamped into it, poured it onto stamps, and anything else we could think of to try. As you will see from the photos, we did some amazing things that day. 



Shrink Plastic flower formed
with a heat gun
You can also use the melting pot to shrink your Shrink Art Plastic. Everyone had at least one sheet of Grafix™ Shrink Film to try.

I brought along my Sissix™ Big Shot machine and some dies, so that added another dimension. Cutting out a large flower from the shrink film, colouring it with ink, felt pen, or even pencil crayons and then shrinking it with the heat gun was the start. We soon learned that we could manipulate the petals while they were hot. This pliability does not last long, but we determined you could re-heat it if necessary.  Yet another interesting discovery!





I also wanted to leave you with a snapshot of a few of us busy working at our tables.  We are messy, but Creative!

Monday, 8 July 2013

Geisha on Cheesecloth

Geisha 





I have just finished creating this Japanese Geisha lady piece and thought I would detail some of the aspects of it.




Cheesecloth image 
I really enjoyed creating this one. First, I printed the Dover image of the Japanese Geisha onto cheesecloth.  The texture of the cheesecloth really adds to the image. In order to do this, the cheesecloth was temporarily adhered to freezer paper by ironing it. Once it was printed, I frayed the edges somewhat.  

The second layer is a piece of fabric stamped with Chinese script.  I then beaded and embroidered the cheesecloth image. The layers of paper behind the fabric are pieces of coffee dyed paper torn from a discard book picked up at the library.  The burlap was toned with a stamp pad and the piece is mounted onto a painted canvas.  


Felted Flower
Images glued to glass domes
The felted flower in the lower left was made by stamping white poly felt, with an espresso ink and then cutting the different size petals (two sets of four for three different sizes. The petals were attached together with a brad and then I used the heat gun to distress the flower.  The leaves are made of distressed felt that was cut with my Big Shot by Sissix, using a Tim Holz die.  The glass domes of the geisha images are readily available on Ebay and the images were purchased through Etsy.  


Wednesday, 15 May 2013


Tyvek Beads





One of the very easy ways to make an interesting bead is to use Tyvek. Tyvek is the the plastic that is used in envelopes, paint suits and so on. The envelopes are available at stationery stores and art stores.

How to make the beads:

Tyvek piece painted with Lumiere paint

  1. Paint both sides of the Tyvek.  Tyvek dries really quickly and takes very little paint to cover it. I found that using Light Body Metallic Acrylic Lumiere paints by Jacquard were especially wonderful as they combine a color with gold, so you get a combined effect from one paint.
    Triangle of Tyvek with edges slashed
  2. Cut a piece of the painted Tyvek in a long triangle, approximately 1 to 1 1/2 inches at one end and narrowing to a point at the other. You can also cut a straight rectangle, 1 inch by 6 inches if you want to have a different type of bead.
    Tyvek rolled around skewer and held with a pin
  3. Slice along the sides of the triangle, putting 1/4 inch slashes either straight toward the middle or on an angle.
  4. Roll the tyvek around a bamboo skewer, or knitting needle, starting with the wide end first and finishing with the pointed end.
  5. Pin the end with a pin to hold the bead together.
  6. Using the heat gun, heat the bead. You will see that it quickly melts to attach itself together, so you can remove the pin right away or wait until the bead is completely finished. The slashes you made along the Tyvek now curl up and melt and create a really interesting texture to the bead.
  7. Wait until the bead cools, then remove it from the bamboo skewer by simply sliding it off.
    Tyvek bead completed

Wow!  Aren’t these great and perfect for adding to your next mixed media piece.

Sunday, 14 April 2013

Textiva Film - the WOW Factor!



Textiva Fusible Film*, rubber stamp, iron and heat gun!!!  



Textiva
12" X 12" Textiva Film Collage



What a great impact you can make using these four items. 

The stamped image is ghostly, yet visible and the film glistens and changes colour in response to the heat.

* Textiva Fusible Film is the material used to make Angelina fibres. It is widely available online and in craft stores. Here's a link to a great online source

Here's how you do it:

Put your rubber stamp on a hard surface, stamp side facing up. Lay a piece of Textiva film over the top of the stamp.
Stamped Textiva
Stamp image ironed onto Textiva

Now layer a piece of parchment paper or teflon sheet over the Textiva film. Using your iron, glide it over the surface of the stamp, using a wool or silk setting.

The image of the stamp will appear on the film, and the heat also changes the colour of the film.

Textiva stamp
Ironed Textiva - iron too hot
I used an iridescent film, called Crystal Green Lightning, so the resulting colours were shimmering greens, reds and blues.
  


I continued to put the stamp under different sections of the film, repeating the process to obtain the leaf print throughout. 

Once I had three sections of film "stamped", I attached them to a background fabric which already had fusible web applied to it, and gently ironed the film to the fabric.  

Once this was done, I took the heat gun to it and created some holes and interesting edges.


Fusible Film collage
12" X 12" Textiva Film Collage
Some final interesting finds:

  • Textiva Fusible film adheres to itself, so you can layer it to get a larger sheet.  
  • If you use an iron that is too hot, it creates some holes in the film as the image of the stamp transfers
  •  Using a non rubber stamp will melt your stamp!